Lyndon Service Area
Lyndon commercial roofing for office buildings, medical offices, and retail, with quiet scheduling and fast leak tracing over occupied space.
Lyndon Roofs
Lyndon commercial roofing centers on offices and clinics. Aging rubber roofs top the list.
Lyndon is a city in eastern Jefferson County, and much of its commercial space is office buildings, medical offices, and small retail. Many of these low-rise buildings have EPDM or modified bitumen roofs from the 1980s through the 2000s, with roof hatches, skylights, and several rooftop units.
The buildings below are full of people during the day. That changes how we work: noisy tear-off moves to early hours or weekends, adhesive work is kept away from air intakes, and a leak over an office or exam room gets traced first.
Common Problems
Lyndon's low-rise office and medical roofs share a short list of common problems.
Unprimed seams on older rubber roofs lift as the adhesive ages. Cleaning and re-taping stops the leaks along those runs. Cleaning back to bare rubber and priming is what makes new tape hold on old EPDM.
Usually Means: The original seams were never primed
Curb flashing around skylights dries out and pulls loose.
Older EPDM shrinks and pulls at parapets and walls, stressing the flashing until it tears.
Condensate lines that drip on the membrane, or pipes lying on it, wear the surface over time.
Water held upslope of skylight curbs finds the weakest corner.
Why It Pays
Lyndon offices and clinics feel every leak. Proactive roof care keeps that from happening.
Cleaning and re-taping lifted EPDM seams keeps an aging rubber roof working instead of replacing it early.
New curb flashing at skylights and hatches ends the leaks that show up only in heavy rain.
Fixing seams and skylight curbs early keeps exam rooms and offices from being closed off after storms.
Shutting down or covering air intakes during adhesive work keeps roof odors out of offices and clinics.
Photo reports over several years show when the roof is due, so replacement fits a budget cycle.
Protecting air intakes during roof work keeps adhesive odors and dust out of occupied space.
Services Here
Lyndon office and medical owners call us most for these four services.
Rubber roofs on Lyndon offices get seams cleaned, primed, and re-taped, with new flashing where shrinkage pulled it loose.
DetailsTwice-yearly inspections with photos help office managers stay ahead of leaks over occupied space.
DetailsWhen an office roof reaches the end of its life, tear-off is scheduled in sections that are sealed each evening.
DetailsSkylight curbs, roof hatches, and pipe boots are rebuilt when they become the source of a ceiling stain.
DetailsCall with the suite and where the water shows up. Leaks over occupied space get traced first, and the area is made watertight before anything else.
How a Job Runs
Four steps, with the schedule set around patients, staff, and the building's air handling.
A roof walk covers seams, skylights, hatches, and unit curbs, with cores where the rubber or plies feel soft underfoot.
The written scope lists each roof problem with a photo and price, plus any work that needs a quiet-hours window.
Before adhesive or welding work, units near the work area are shut down or their intakes covered, coordinated with your facility contact.
Our final walk checks every seam and flashing detail, and staff areas below are checked for any dust or debris.
Local Factors
Lyndon office and medical buildings share a few traits that change how roof work is done.
Offices and clinics fill up during business hours, so noisy roof work and crane lifts move to early mornings or weekends.
Many low-rise offices have skylights and roof hatches that each add a curb, flashing, and a possible leak point.
EPDM installed decades ago is reaching the age where seams lift and flashing pulls at the walls.
Nearby
Office and medical roofs in these areas get the same service. Somewhere else? Just call us.
Indian Hills and Pewee Valley are also in our service area.
Answers for Lyndon office, medical, and retail building owners.
Roof Condition
If the rubber is still flexible and cores show dry insulation, re-taping the seams and rebuilding failed flashing extends the roof's life. If seams are lifting everywhere and cores come up wet, replacement costs less over the next ten years.
Heavy rain raises water levels around the skylight curb and reaches flashing that stays dry in light rain. Cracked curb flashing or a blocked drain nearby is the usual cause, and both are repairable. We also check the skylight frame and glazing seals, since older Lyndon skylights can leak at the frame once the curb is fixed.
Membranes and Systems
Yes. Skylights that are no longer wanted can be removed, the deck opening framed and closed, and the new roof run over it. Skylights that stay get new curbs and flashing as part of the replacement.
Yes. New EPDM can be tied into an existing rubber roof with primed, taped seams, so an addition or repaired area joins the old roof without a separate system in between. The tie-in is flashed where the addition meets the original wall, which is where most addition leaks start on Lyndon offices.
Planning the Work
Spring and fall are the standard, plus a check after any hail or major wind. For buildings with medical tenants, many owners add a quick visit after HVAC service work on the roof. Each visit is logged with photos, so office managers can see how seams and skylight curbs change from one season to the next.
Yes. Tear-off is done in sections that are closed and sealed each day, and the loudest work is scheduled early or on weekends. Air intakes near the work are shut down or covered so offices and clinics below can stay open.
Next Step
Send the address and a contact for roof access. We set a time that suits the building and send photos and a written scope afterward.
Roof Leaking or Wearing Out? Have Us Call You
Leave a name and number to talk about your roof.
Thank You. Your Request Is In.
We have your name and number and will call you about the roof. To talk now, call (502) 293-5786.
Or call (502) 293-5786
